Αυτόνομο φωτοβολταϊκό σύστημα για ψυγείο 12V / 65watt – 75 watt
Αυτόνομο φωτοβολταϊκό κιτ / πακέτο για μικρό ψυγείο 65-75 watt /12V ή 220V με προσθήκη inverter
Inverter καθαρού ημιτόνου πολυμηχάνημα 1250VA/ 1000 WATT με φορτιστή μπαταριών και σύστημα μεταγωγής. Διαθέτει:
Τετραπλή λειτουργία:
Τεχνικές Προδιαγραφές:
Τιμή χωρίς ΦΠΑ
Out of stock
Inverter καθαρού ημιτόνου πολυμηχάνημα 1250VA/ 1000 WATT με φορτιστή μπαταριών και σύστημα μεταγωγής. Διαθέτει:
Τετραπλή λειτουργία:
Τεχνικές Προδιαγραφές:
To inverter:
►High overload ability up to 300% rated power (20 sec)
►Low voltage trip selectable (9.5V/10V or 10V/10.5V) extracting max power from various batteries with different protection
►Low quiescent current, power saver mode to reduce power consumption to 10W (3 sec sensing cycle)/3W (30s sensing cycle)
►DC13V battery recover point, dedicated for solar systems
To battery charger:
►3 step intelligent battery charging (bulk, absorption, and float)
►8 pre set battery type (flooded lead acid, gel, or absorbed glass mat (AGM) batteries) selector
plus de-sulphation for totally flat batteries
►Powerful charge rate up to 90A, selectable from 0-100%
►PFC (Power Factor Correction) for charger, less power consumption than conventional units
To transfer:
►10ms typical transfer time between battery and AC, guarantees power continuity
►15s delay before transfer when AC resumes, extra protection for loads when used with generator
►Input AC voltage range selectable (184-253V or 154-253V) for different kinds of loads
►30/40A through current ability
►Allows start up and through power with depleted batteries
To remote control & others:
►Ability to switch the unit on/off, select/deselect power saver mode
►17 alarms/warnings, informative for easier operation and trouble-shooting
►Front panel LED indicators and adjustable switch selectors
►Battery/AC priority switch available for off grid solar/wind system
►Low battery, overload, and high battery, over temperature protection circuitry
►RS232/USB communication port available
►Generator compatible
Technical specifications:
| General specifications: | ||||||
| Input wave form: |
Sine wave(Utility or generator) |
|||||
| Nominal voltage: |
120VAC |
230VAC |
||||
| Low voltage trip: |
80V/90V+/-4% |
184V/154V+/4%- |
||||
| Low voltage re engage: |
90V/100V+/-4% |
196V/164+/-4% |
||||
| High voltage trip: |
140V+/-4% |
253V+/-4% |
||||
| High voltage re engage: |
135V+/-4% |
243V+/-4% |
||||
| Max input AC voltage: |
150VAC |
270VAC |
||||
| Nominal input frequency: |
50Hz or 60Hz(Auto detect) |
|||||
| Low frequency trip: |
47Hz for 50Hz, 57Hz for 60Hz |
|||||
| High frequency trip: |
55Hz for 50Hz, 65Hz for 60Hz |
|||||
| Output wave form: |
(Bypass mode) same as input |
|||||
| Overload protection: |
Circuit breaker |
|||||
| Short circuit protection: |
Circuit breaker |
|||||
| Transfer switch rating: |
30 amp or 40 amp |
|||||
| Efficiency on line transfer mode: |
95%+ |
|||||
| Line transfer time: |
10 ms typical |
|||||
| Bypass without battery connected: |
Yes |
|||||
| Max bypass current: |
30 amp or 40 amp |
|||||
| Bypass over load current: |
35 amp or 45 amp: alarm |
|||||
| Inverter specification/output | ||||||
| Output wave form: |
Pure sine wave |
|||||
| Output continuous power watts: |
1000 |
2000 |
3000 |
4000 | 5000 | 6000 |
| Output continuous power VA: |
1000 |
2000 |
3000 |
4000 | 5000 | 6000 |
| Power factor: |
0.9-1.0 |
|||||
| Nominal output voltage rms: |
120/230VAC |
|||||
| Output voltage regulation: |
+-/10% rms |
|||||
| Output frequency: |
50Hz+/-0.3Hz or 60Hz+/-0.3Hz |
|||||
| Nominal efficiency: |
>88% |
|||||
| Surge ratings: |
3000 |
6000 |
9000 |
12000 | 15000 | 18000 |
| Short circuit protection: |
Yes, fault after 1 sec |
|||||
| THD |
<10% |
|||||
| Inverter specification/input: | ||||||
| Nominal input voltage: |
12.0V |
24.0V |
48.0V |
|||
| Minimum start voltage: |
10.0V |
20.0V |
40.0V |
|||
| Low battery alarm: |
10.5V/11.0V |
21V/22.0V |
42.0/44.0V |
|||
| Low battery trip: |
10.0V/10.5V |
20.0V/21V |
40.0V/42V |
|||
| High voltage alarm: |
16.0V |
32.0V |
64.0V |
|||
| Low battery voltage recover |
15.5V |
31.0V |
62.0V |
|||
| Power saver: |
Below 25 watts when enabled |
|||||
| Power saver: |
Same switched on/off on remote |
|||||
| Charger mode specifications: | ||||||
| Input voltage range: |
90-135VAC |
194-243VAC/164-243VAC(W) |
||||
| Output voltage: |
Dependent on battery type |
|||||
| Max charger current: |
35A/70A (Charger current controller) |
|||||
| Battery initial voltage for start up: |
10-15.7V for 12V(*2 for 24V; *4 for 48V) |
|||||
| Over charger protection shutdown: |
15.7V for 12V(*2 for 24V; *4 for 48V) |
|||||
| Charger curves (4 stage constant current) battery types | ||||||
| 4 steps digital controlled progressive charge | ||||||
| Battery type: | Fast V | Float V(*2 for 24V; *4 for 48V) | ||||
| GEL U.S.A. | 14.0 | 13.7 | ||||
| A.G.M. 1 | 14.1 | 13.4 | ||||
| A.G.M. 2 | 14.6 | 13.7 | ||||
| Sealed lead acid | 14.4 | 13.6 | ||||
| GEL Euro | 14.4 | 13.8 | ||||
| Open lead acid | 14.8 | 13.3 | ||||
| Calcium | 15.1 | 13.6 | ||||
| De-sulphation | 15.5 for 4 hrs | |||||
| Remote control/RS232/USB | Yes, optional | |||||
| Mounting | Wall mount | |||||
| Size: in mm | 1000 model: 520*315*300 mm3 | |||||
| 2000/3000 model: 580*315*300 mm3 | ||||||
| 4000/5000/6000 model: 740*315*300 mm3 | ||||||
| Gross weight: | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 |
| 20Kg | 22Kg | 26Kg | 37Kg | 47Kg | 47Kg | |
| Weight | 12 kg |
|---|---|
| Brand |