10A PWM ρυθμιστής φόρτισης LS1024

19.00 
11.50  Χωρίς ΦΠΑ
14.26  Συμπεριλαμβάνει ΦΠΑ

10A, προγραμματιζόμενος ρυθμιστής φόρτισης με δυνατότητα νυκτερινής λειτουργίας.

 Τεχνικά στοιχεία -προγραμματισμός

QUICK START INSTRUCTIONS  
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 
1. Mount the controller to a vertical surface. Allow space above and below the controller for air flow. 
2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 
3. It is recommended that the connections be made in order from 1 to 6. (see the following picture)
 
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 
5. Connect the SOLAR(PV array) next. The green LED indicator will light if sunlight is present. 
6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 
7. Press the BUTTON as 6 or 7 to verify the system connecting.
3. Connect the consumer to the charge regulator – plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery!
LIGHTING CONTROL OPTIONS
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirmed you have selected the right one. 
2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 
3. 10 minutes off before the controller start to work. 
4. A brief description follows below:
 0,1,2,3,4,5,6,7  For DC output
 0  Dusk-to-Dawn, light is on all light
 1  1 hours light is turn on after sundown
 2  2 hours light is turn on after sundown
 3  3 hours light is turn on after sundown
 4  4 hours light is turn on after sundown
 5  5 hours light is turn on after sundown
 6  6 hours light is turn on after sundown
 7  7 hours light is turn on after sundown
 0。  8 hours light is turn on after sundown
 1。  9 hours light is turn on after sundown
 2。  10 hours light is turn on after sundown
 3。  11 hours light is turn on after sundown
 4。  12 hours light is turn on after sundown
 5。  13 hours light is turn on after sundown
 6。  Lights remain turned off, ON/OFF mode
 7。  Test mode, lights on after it detects no light, lights off after it detects light.

 

Τιμή χωρίς ΦΠΑ

Out of stock

  ... people are viewing this right now

  Share

Ο 10A, προγραμματιζόμενος ρυθμιστής φόρτισης με δυνατότητα νυκτερινής λειτουργίας σε μαύρο ή λευκό χρώμα. Διαθέτει μικροεπεξεργαστή PWM για αποδοτικότερη και ομαλότερη φόρτιση . Προγραμματιζόμενος και για  Νυκτερινή λειτουργία. Διαθέτει  αισθητήρα φωτός και χρονοδιακόπτη. Περιλαμβάνει υποδοχές σύνδεσης συσκευών οι οποίες προγραμματίζονται να λειτουργούν μόλις νυχτώσει ενώ παράλληλα  απενεργοποιούνται σύμφωνα με τον εκάστοτε προγραμματισμό.

 Τεχνικά στοιχεία -προγραμματισμός

QUICK START INSTRUCTIONS  
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 
1. Mount the controller to a vertical surface. Allow space above and below the controller for air flow. 
2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 
3. It is recommended that the connections be made in order from 1 to 6. (see the following picture)
 
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 
5. Connect the SOLAR(PV array) next. The green LED indicator will light if sunlight is present. 
6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 
7. Press the BUTTON as 6 or 7 to verify the system connecting.
3. Connect the consumer to the charge regulator – plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery!
LIGHTING CONTROL OPTIONS
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirmed you have selected the right one. 
2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 
3. 10 minutes off before the controller start to work. 
4. A brief description follows below:
 0,1,2,3,4,5,6,7  For DC output
 0  Dusk-to-Dawn, light is on all light
 1  1 hours light is turn on after sundown
 2  2 hours light is turn on after sundown
 3  3 hours light is turn on after sundown
 4  4 hours light is turn on after sundown
 5  5 hours light is turn on after sundown
 6  6 hours light is turn on after sundown
 7  7 hours light is turn on after sundown
 0。  8 hours light is turn on after sundown
 1。  9 hours light is turn on after sundown
 2。  10 hours light is turn on after sundown
 3。  11 hours light is turn on after sundown
 4。  12 hours light is turn on after sundown
 5。  13 hours light is turn on after sundown
 6。  Lights remain turned off, ON/OFF mode
 7。  Test mode, lights on after it detects no light, lights off after it detects light.

 

Τιμή χωρίς ΦΠΑ

Weight 1 kg
Brand

Most viewed products

Recently viewed products

  • -25%Limited
    Conergy-MΙC350VA 264.00 
    199.00  Χωρίς ΦΠΑ
    246.76  Συμπεριλαμβάνει ΦΠΑ

    350VA Καθαρού ημιτόνου 12V ή  24V

    Η σειρά Conergy MIC νίκες για αποδεδειγμένη μέγιστη απόδοση, ηλεκτρονικά χαρακτηριστικά ασφαλείας, ευέλικτη εφαρμογή και εξαιρετικά στιβαρή κατασκευή. Εγγυάται κατά συνέπεια αποτελεσματική, ασφαλή και μακρόχρονη λειτουργία του off-grid του συστήματός σας.

     Τιμή χωρίς ΦΠΑ

     

    Available on backorder

  • -23%Limited
    Epsolar Tracer 8415AN MPPT
Ρυθμιστής Φόρτισης MPPT Epsolar Tracer 8415AN 80A 12/24/36/48V IP20
    Epsolar Tracer 8415AN MPPT 80A ρυθμιστής φόρτισης 499.00 
    385.00  Χωρίς ΦΠΑ
    477.40  Συμπεριλαμβάνει ΦΠΑ

    Epsolar Tracer 8415AN MPPT

    Ρυθμιστής Φόρτισης MPPT Epsolar Tracer 8415AN 80A 12/24/36/48V IP20

  • -2%Limited
    Cyrix-Li-Charge 1224V-120A, victron, ρελέ μπαταριών
    Cyrix-Li-Charge 12/24V-120A 56.05 
    55.05  Χωρίς ΦΠΑ
    68.26  Συμπεριλαμβάνει ΦΠΑ

    Cyrix-Li-Charge 12/24V-120A

    Ο συνδυαστής μπαταριών Cyrix-Li-Charge 12/24V-120A είναι ένα ενισχυμένο ρελέ που ελέγχεται μέσω μικροεπεξεργαστή και συνδέει αυτόματα τις μπαταρίες

    Available on backorder

  • -34%Limited
    Καλώδιο Solar F1x10 3.80 
    2.50  Χωρίς ΦΠΑ
    3.10  Συμπεριλαμβάνει ΦΠΑ

    10μμ Solar καλώδιο με 3 στρώματα μόνωσης & προστασία από την υπεριώδη ακτινοβολία.

    Μονοπολικό καλώδιο για αντοχή στην έκθεση σε αντίξοες καιρικές συνθήκες και στην ηλιακή ακτινοβολία, κατάλληλα για χρήση σε φωτοβολταϊκά συστήματα

     Τιμή χωρίς ΦΠΑ

  • -16%Limited
    Quattro 12/5000/200-100/100 120V 3,442.00 
    2,908.00  Χωρίς ΦΠΑ
    3,605.92  Συμπεριλαμβάνει ΦΠΑ

    Η κύρια έξοδος λειτουργεί ως αδιάλειπτη παροχή. Το MultiPlus αναλαμβάνει την τροφοδοσία των συνδεδεμένων σε αυτή φορτίων σε περίπτωση βλάβης στο δίκτυο ή όταν η κύρια τροφοδοσία / γεννήτρια αποσυνδεθεί. Αυτό συμβαίνει σχεδόν ακαριαία (σε λιγότερο από 20 χιλιοστά του δευτερολέπτου) ώστε οι υπολογιστές και άλλες ηλεκτρονικές συσκευές να συνεχίσουν να λειτουργούν χωρίς διακοπή.

    Η δεύτερη έξοδος είναι ενεργή μόνο όταν υπάρχει διαθέσιμη η κύρια τροφοδοσία AC σε μία από τις εισόδους του MultiPlus. Κατ’ αυτό τον τρόπο, φορτία που δεν πρέπει να τροφοδοτηθούν από την μπαταρία σε μία έκτακτη ανάγκη, όπως π.χ. ένας θερμοσίφωνας, μπορούν να συνδεθούν σε αυτή την έξοδο (η δεύτερη έξοδος είναι διαθέσιμη μόνο στα μοντέλα ισχύος 3 kVA και άνω).

    In stock

  • -30%Limited
    Studer AJ 350-24 320.00 
    223.00  Χωρίς ΦΠΑ
    276.52  Συμπεριλαμβάνει ΦΠΑ

    350VA/24V καθαρού ημιτόνου inverter / 30 min

    Πλήρης ημιτονοειδής κυματομορφή τάσης εξόδου, Προστασία υπερφόρτισης και εκφόρτισης.

     

    Τιμή χωρίς ΦΠΑ

    Available on backorder

  • -39%Limited
    Αυτόνομο Φ/Ο Σύστημα Standard 0.75KWH – 0.90 kwh
    EXTRA-2 Οικονομικό Αυτόνομο Φωτοβολταϊκό Σύστημα 0.75KWH – 0.90 kwh 12V DC 490.00 
    300.00  Χωρίς ΦΠΑ
    372.00  Συμπεριλαμβάνει ΦΠΑ

    EXTRA-2 Οικονομικό Αυτόνομο Φωτοβολταϊκό Σύστημα 0.75KWH – 0.90 kwh 12V DC

  • -31%Limited
    SCC VIC BlueSolar PWM-Pro to USB interface cable 14.88 
    10.20  Χωρίς ΦΠΑ
    12.65  Συμπεριλαμβάνει ΦΠΑ

    Με το καλώδιο διασύνδεσης USB μπορείτε να συνδέσετε το BlueSolar PWM-Pro στον υπολογιστή σας.

     

    Τιμή χωρίς ΦΠΑ

    Available on backorder

  • -24%Limited
    Xantrex DR 1524 E 1,139.00 
    869.00  Χωρίς ΦΠΑ
    1,077.56  Συμπεριλαμβάνει ΦΠΑ

    Μετατροπέας 1500 VA 24V με ενσωματωμένο φορτιστή και μεταλλικό ρελέ

    Τιμή χωρίς ΦΠΑ

  • -32%LimitedSold Out
    10kw-Yingli Solar 40τεμ. x 250watt 5,900.00 
    3,990.00  Χωρίς ΦΠΑ
    4,947.60  Συμπεριλαμβάνει ΦΠΑ

    10kw Φωτοβολταικά πλαίσια ισχύος 10.000w Yingli Solar 250 watt πολυκρυσταλλικού πυριτίου. Αφορά αγορά πάνελς.

    Τιμή χωρίς ΦΠΑ

    Out of stock

fotovoltaiko-στέγη, PWM Solar Charger 10A, ρυθμιστής φόρτισης, fotovoltaiko-στέγη,

fotovoltaiko-στέγη, PWM Solar Charger 10A, ρυθμιστής φόρτισης,fotovoltaiko-στέγη,

fotovoltaiko-στέγη, Ρυθμιστής Προγραμματιζόμενος με νυχτερινή λειτουργία- PWM Solar Charger 10A, διαθέτει αισθητήρα φωτός και χρονοδιακόπτη, τιμές fotovoltaiko-στέγη,

Close My Cart
Close Wishlist
Recently Viewed Close
Close
Close
Categories